
ͻ
									      
		*********************************************		      
		*	    VGA4000 Graphic Adapter	    *		      
		*		 OS/2  (v2.0)		    *		      
		*      High Resolution Display Drivers	    *		      
		*********************************************		      
									      
									      
   I.	INSTALLATION							      
									      
	Follow instructions below very carefully when install the driver:     
									      
	1. Install the OS/2 version 2.0 software in your computer system      
	   with its standard graphic mode (EGA/VGA) first and verify your     
	   installation is correct.  If your installation of OS2/2.0 is       
	   working fine, then you can start to install the VGA4000 high       
	   resolution drivers.	 Follow steps below carefully.		      
									      
	2. Save the file "DISPLAY.DLL" in the directory "C:\OS2\DLL" first.   
	   This can be done by using the "COPY" command.  For instance:       
									      
	       C:\OS2\DLL>COPY DISPLAY.DLL DISP_SAVE.DLL   [ENTER]	      
									      
	3. Decide which driver you want to install into your system.  Assume  
	   that you already use the "INSTALL" utility installed the OS2 2.0   
	   driver files in your hard disk, for instanse, in the directory     
	   C:\VGA4000\OS2\OS2_20.					      
									      
	4. Make sure you have the following statements in your "CONFIG.SYS"   
	   file, or use text editor to create them:			      
									      
			IOPL=YES					      
			LIBPATH=C:\OS2\DLL				      
									      
	5. Now prepare to copy driver which you want to install from	      
	   OS2 driver directory into the "\OS2\DLL" directory.  Once again,   
	   assume your driver are located in C:\VGA4000\OS2\OS2_20.	      
									      
	   - If you are running DOS, go to step 6.			      
									      
	   - If you are running OS/2, go to step 7.			      
									      
	6. If you are now under the DOS environment and want to install the   
	   800 x 600 256 colors driver, perform following commands:	      
									      
	   C:>COPY C:\VGA4000\OS2\OS2_20\ET4000PM.DLL C:\OS2\DLL	      
	   C:>COPY C:\VGA4000\OS2\OS2_20\800_256.DLL C:\OS2\DLL\DISPLAY.DLL   
	   C:>COPY C:\VGA4000\OS2\OS2_20\800_256.CFG C:\OS2\DLL\DISPLAY.CFG   
									      
	   Following DOS commands allow you to install the 1024 x 768 driver  
	   with 256 colors:						      
									      
	   C:>COPY C:\VGA4000\OS2\OS2_20\ET4000PM.DLL C:\OS2\DLL	      
	   C:>COPY C:\VGA4000\OS2\OS2_20\1024_256.DLL C:\OS2\DLL\DISPLAY.DLL  
	   C:>COPY C:\VGA4000\OS2\OS2_20\1024_256.CFG C:\OS2\DLL\DISPLAY.CFG  
									      
	   Other OS2 2.0 drivers, such as 800 x 600 16 colors, can be	      
	   installed in the similar way.				      
									      
	   YOUR OS/2 DRIVER INSTALLATION IS COMPLETED.	Now you can reboot    
	   your system with OS/2.					      
									      
	7. If you are under the OS/2 environment, please do step 7 and 8.     
									      
	   Select either "DOS" window or "OS\2 Window" on OS/2 PM screen.     
	   For example, if you want to install the 1024 x 768 16 color	      
	   driver, do following commands at either DOS or OS2 prompt:	      
									      
	   <DOS>							      
	   C:>COPY C:\VGA4000\OS2\OS2_20\ET4000PM.DLL C:\OS2\DLL	      
	   C:>COPY C:\VGA4000\OS2\OS2_20\1024_16.CFG C:\OS2\DLL\DISPLAY.CFG   
									      
	   <OS2 2.0>							      
	   [C:>]COPY C:\VGA4000\OS2\OS2_20\ET4000PM.DLL C:\OS2\DLL	      
	   [C:>]COPY C:\VGA4000\OS2\OS2_20\1024_16.CFG C:\OS2\DLL\DISPLAY.CFG 
									      
	8. Reboot your system with DOS (NOT OS/2 !).  Type in the DOS	      
	   command below:						      
									      
	   C:>COPY C:\VGA4000\OS2\OS2_20\1024_16.DLL C:\OS2\DLL\DISPLAY.DLL   
									      
	   YOUR OS/2 DRIVER INSTALLATION IS COMPLETED.	Now you can reboot    
	   your system with OS/2.					      
									      
									      
ͼ
