This patch is for the Dell OptiPlex systems using the ATI 3D
Rage Pro AGP Controller and IBM OS/2 Warp 4.0 (Fixpacks xr_m006, xr_m007).

Revision A00

The patch will rename the existing m64gradd.dll file in the c:\os2\dll
directory and copy the patch over.

ren c:\os2\dll\m64gradd.dll *.bak
copy m64gradd.dll c:\os2\dll
copy m64gradd.sym c:\os2\dll

Install complete, please shutdown your system and reboot.

Installation Instructions:

I.   Installing from DOS.
II.  Installing from OS/2.
III. Installation Note.


I.  Installing from DOS.
    -Boot the system to a DOS diskette.
    -Place the Patch Diskette into the floppy drive.
    -Type in "Install.bat" and press "Enter".
    -Remove the diskette and reboot your system.
    -Done.
    

II. Installing from OS/2.
    -Boot to the OS/2 "Installation Diskette".
    -Place "Diskette 1" into the drive when prompted.
    -Place "Diskette 2" into the drive when prompted.
    -Press the "F3" key for "F3=Command Prompt".
    -Place the Patch Diskette into the floppy drive.
    -Type in "Install.cmd" and press "Enter".
    -Remove the diskette and reboot your system.
    -Done.

III. Installation Note: OS/2 will not allow you to access a file that
     is currently in use. This is why you must bypass the video drivers
     and boot to a command prompt. (Installation Steps I, II.)


If a problem should occur, simple replace the m64gradd.dll file with the
backup file that was created.

Example: 
del c:\os2\dll\m64gradd.dll
ren c:\os2\dll\m64gradd.bak m64gradd.dll

Note: Follow the instructions above to boot the system.





