YMERSION Control Application for OPL3-SA3
Version 3.04
April 1997

---
Contents of file
---
This application consists of the following files.
	YMERSION.EXE : YMERSION Control Application for OPL3-SA3
	YMERSION.TXT : This file

---
Overview
---
1. This application is an OS/2 native application only for the OPL3-SA
series driver version 3.04 and the OPL3-SA3 board.
Please be aware that it will not run on other configurations.

---
Installation and operation
---
1. When the driver set is installed, YMERSION.EXE will be installed in the
directory in which the multi-media software support (MMPM/2) functionality
is located (normally the \MMOS2 directory).
Alternatively, if you have been using a driver of version 3.03.0 or
earlier, it may be copied to the directory which you specify. In this case,
please delete the old YMERSION.EXE before installing the driver set.
After the driver set has been installed, open the folder of the directory
into which the software was installed (normally the \MMOS2 folder), and
double-click the icon to start up the program. Alternatively, you can move
to the above directory at the OS/2 command prompt (normally CD \MMOS2) and
type YMERSION.EXE (return) to start up the program.
2. You can adjust the playback tone of the OPL3-SA3 card by sliding the
Ymersion/Treble/Bass slider bars.
3. In the case of the OPL3-SA3B board, you will be able to select the
YMERSION MODE. Select the desired mode.

---
Supplementary remarks
---
Settings which were made in this application will remain in effect until
the system is shut down.
In the case of the OPL3-SA3B board, the desired YMERSION MODE can be
selected separately at the time of driver installation. If you wish to set
the mode permanently, follow the procedure given in README.TXT to specify
the YMERSION MODE.

The upper 3 digits of the version number of this application indicate the
version of the OPL3-SA series device driver which supports its
functionality.
If the software does not operate correctly, check the type of board and the
version of the driver.
Also, if you update the OPL3-SA series device driver, be sure to also
update the application included with this software.

---
History
---
April 20, 1997 -- Version 3.04.0
- Support for the following languages.
	- English
	- Japanese
	- French
	- Italian
	- German
	- Spanish
- The following fixes were made.
	- Depending on the type of video card, problems had occurred with
screen re-drawing when a slider was moved. The occurrence of screen
re-drawing problems was reduced by deleting the slider movement buttons,
leaving only the sliders.
	- When the software was run on a non-Japanese version of OS/2,
there had been problems with overlapping character placement. This was
fixed by adopting English VGA as the standard.
	- Window content was modified.

March 12, 1997 -- Version 3.03.0
- Support for OPL3-SA3B.
- Change application name from OPL3DEMO to YMERSION.

December 16, 1996 -- Version 3.02.0
- Support for driver set update and change in version numbering

November 1, 1996 -- Version 3.0.1.0
- Fixed wrong release date for version 3.0.0.0
- Support for version driver set update and version numbering

October 30, 1996 --- Version 3.0.0.0
- First release