     
                         Additional Information
     
          Sound Galaxy (Washington) Device Driver version 1.00 
                         For OS/2 Warp 3.0



A.   Installation of Sound Galaxy (Washington) OS/2 Warp Device Driver
     =================================================================        
     
     I. For Non-existence of other Audio Adapters 
     --------------------------------------------

     In the process of installing OS/2 Warp with the sound card in the system,
     the "Multimedia Device Support" under "System Configuration" screen will
     display "Sound Blaster Pro (MCV or OPL3)". This has to be removed before 
     installing the Sound Galaxy Sound Card device driver. Please follow the 
     following steps : (N.B. Skip steps 1 to 5 if OS/2 Warp has already been
     installed).
   
       1.  Click at the icon beside the "Multimedia Device Support" when the
           "System Configuration" screen pops up during the installation
           process.

       2.  Remove the Drivers from the "Device[s] in System to be install".

       3.  Select O.K. The [None] option will be shown at the "Multimedia 
           Device Support".

       4.  Select O.K again and continue with the rest of the instruction to
           complete the installation of OS/2 Warp.

       5.  Shut down and reboot the system after the installation is completed.

       6.  Select <Multimedia Application Install> from the Multimedia folder.
     
       7.  Insert Sound Galaxy OS/2 Warp Audio Driver Diskette in drive A: 
           or B:. 
     
       8.  Change the source drive to where the Sound Galaxy OS/2 Warp      
           Audio Driver diskette is.  (i.e. A:\ or B:\). 
      
       9.  Highlight "Sound Galaxy" feature and then select "Install".
     
       10. Select "YES" in "Change CONFIG.SYS" dialog box and continue with 
           driver installation.
     
       11. Select "1" when the system prompts you to select the number of 
           Sound Card.
      
       12. It is recommended that you use the default settings when the     
           Sound Galaxy Sound Card Installation screen appears.  
           
       13. System will then update the CONFIG.SYS file, and please follow   
           the on screen instructions to continue the installation.
     
       14. Shut down and reboot the system after installation is completed.

      
       II. For existence of other Audio Adapters
       -----------------------------------------

       If any Audio Device Driver is currently installed, it has to be removed
       before installing the Sound Galaxy Sound Card Device Driver. Refer to 
       the corresponding audio adapter manual or readme.txt for more details.

       For example, if Sound Blaster Pro device driver is installed, the
       following lines must be removed from the respective files.

       CONFIG.SYS file

         Device=C:\MMOS2\SBP2D2.SYS 1 1 5 220 4 /N:SBAUD1$
         Device=C:\MMOS2\AUDIOVDD.SYS SBAUD1&

       MMPM2.INI file

         [Drivers]
         Waveaudio = IBMWAVESB01
         Sequencer = IBMSEQSB01
         Ampmix = IBMAMPMIXSB01

       After all the previously loaded audio device driver has been removed 
       and the system rebooted, follow steps 6 to 14 in Part I to install 
       the Sound Galaxy Sound Card Device Driver.
    


B.   De-installation of Sound Galaxy (Washington) OS/2 Warp Device Driver
     ====================================================================
 
     To de-install the Sound Galaxy Device Driver, the following lines
     must be removed from the respective files.

     CONFIG.SYS

       Device=C:\MMOS2\AZT16DD.SYS /B:530 /D:0 /I:10 /M:1,330,5 /N:AZT161$
       Device=C:\MMOS2\SGAUDVDD.SYS AZT161$

     MMPM2.INI file

       [Drivers]
       Waveaudio = IBMWAVEAZT1601
       Sequencer = IBMSEQAZT1601
       Ampmix = IBMAMPMIXAZT1601



C.   Installation of Sound Galaxy (Washington) WIN-OS/2 Device Driver
     ================================================================

     Please note that any previously installed Windows sound card driver
     has to be removed before installing the WIN-OS/2 driver.
   
       1. Open the WIN-OS/2 folder from the OS/2 SYSTEM COMMAND PROMPTS folder.

       2. Open the CONTROL PANEL from the WIN-OS/2 MAIN Group.

       3. Double click on the DRIVERS icon.

       4. Choose the "ADD" button to add a new driver.

       5. Highlight the "Unlisted or Updated Driver" item and then select the
          "OK" button.

       6. Enter the drive and the path (i.e A:\WIN_OS2) in the Install 
          Driver windows and then select "OK" button.

       7. Highlight the "16-bit Audio Driver" in the list windows and press
          "Enter" to continue.

       8. Use the default setting in 16-bit Audio Board setup windows.

       9. Select "Restart Windows Now" to restart the Windows in order for
          the added driver to take effect. 


Note : As WIN-OS/2 is not 100% compatible with Microsoft Windows Sound System,
       there might be problems encountered when running Voyetra application
       like Audiostation and MIDI Orchestrator in WIN-OS/2 platform. To play
       WAV or MIDI files, please use MediaPlayer in WIN-OS/2 instead. 

       
                       ------------   The End   -------------
     
     
       
